Lightning storm over a city with a lightning arrester on a rooftop
Lightning Protection Division

Lightning Protection & Lightning Arrester Services Across India

Henel Engineers supplies and installs comprehensive lightning protection systems — from ESE air terminals to full earthing networks — for industrial, commercial, and infrastructure projects across India.

TOPBAS Lightning Protection Products

Henel Engineers is an authorised supplier of TOPBAS lightning protection products, imported from Turkey. TOPBAS manufactures a range of ESE lightning arresters and lightning protection accessories for global markets.

ESE Lightning Arresters

TOPBAS SIRIUS ESE lightning arrester, stainless steel early streamer emission air terminal
TOPBAS SIRIUS

ESE Lightning Arrester

Imported from Turkey

Technical Specifications

TOPBAS SIRIUS ESE Lightning Arrester

TechnologyNon-electronic Early Streamer Emission (ESE)
Advance Time (ΔT)60 μs
Material304L Stainless Steel
Protection RadiusUp to 107 m (5 m mast, Level IV)
Lightning Impulse Current200 kA tested (10/350 μs)
StandardsNF C 17-102 · UNE 21186 · TS EN 62561

Specifications are sourced from TOPBAS product documentation. Consult the official TOPBAS datasheet and a qualified engineer for project-specific design decisions. Henel Engineers does not independently certify these specifications.

UMBRAECO non-electronic ESE lightning arrester
UMBRAECO

ESE Lightning Arrester

Non-Electronic ESE

Features

UMBRAECO ESE Lightning Arrester

TypeNon-Electronic ESE
StandardNF C 17-102 (2011)
CertificationCE Certified
Delta T (ΔT)10 µSec (Triggering Time Advance)
Protection RadiusUp to 51 meters (Level IV)
Power SourceNo battery or external power source required

Designed and tested as per NF C 17-102 (2011) Standard. Consult a qualified engineer for project-specific design decisions.

Surge Protection Devices (SPD)

Surge Protection Device (SPD) Type 2 single phase unit for electrical surge protection
SPD

Surge Protection Device

Type 1 + 2 SPD, Three Phase

Technical Specifications

Surge Protection Device (SPD)

ModelTB7K320T12L
Protection TypeType 1 + 2 (Class B + C)
PhaseThree Phase
Rated Voltage (Uc)320 VAC
Voltage Protection Level (Up)1.6 kV
Impulse Current (Iimp)7 kA
Nominal Discharge Current (In)30 kA
IP RatingIP20
Poles Number3 Pole + N

Consult a qualified engineer for project-specific design decisions.

Earth Rods

Copper bonded earth rod for earthing and grounding installations
Copper Bonded Earth Rod

Copper Bonded Earth Rod

Earthing Electrode

Product Details

Copper Bonded Earth Rod

Minimum Order Quantity1 Piece
Usage/ApplicationEarthing
Length1 meter, 2 meter and 3 meter
Diameter17.2 mm
GI earth rod, galvanised iron earthing rod for grounding installations
GI Earth Rod

GI Earth Rod

Earthing Electrode

Product Details

GI Earth Rod

Length1 m, 2 m, 3 m
Diameter48 mm
Wall Thickness3 mm
MaterialClass B GI Pipe

Earthing Compound

CARBOMAXX earthing compound bag, backfill compound for earthing pits
CARBOMAXX

Earthing Compound

TOPBAS Earthing Compound

Product Details

CARBOMAXX Earthing Compound

Physical StatePowder
BrandTOPBAS
Packaging TypeBag
Packaging Size10 kgs, 25 kgs
Country of OriginMade in India

Conventional Lightning Arresters

Copper bonded conventional lightning arrester with mounting base
Copper Bonded

Copper Bonded Conventional Lightning Arrester

External Lightning Protection

Product Details

Copper Bonded Conventional Lightning Arrester

Lightning Protection MaterialCopper
Current Rating100 kA
PhaseSingle Phase
No. of PolesExternal
TypeExternal
Highest Voltage ProtectionExternal
Protection Radius5 meters
Country of OriginMade in India

Earth Pit Chambers

Earth pit cover chamber, polyplastic earthing pit cover with lid
Earth Pit Cover

Earth Pit Chamber Cover

Earthing Pit Cover

Product Details

Earth Pit Cover

Size6 Inch
MaterialPolyplastic
FinishingPolished
ColorBlack
Equipment TypeEarthing Pit Cover
Country of OriginMade in India
DimensionTop (Dia) 155 mm x Bottom (Dia) 210 mm x Height 240 mm
FRP earth pit cover chamber, corrosion resistant earthing pit cover with green lid
FRP Earth Pit Cover

Earth Pit Chamber Cover

Earthing Pit Cover

Product Details

FRP Earth Pit Cover

Size10 Inch
MaterialFRP
ColorBlack
DimensionsTop (Dia) 254 mm x Bottom (Dia) 210 mm x Height 240 mm
FeaturesCorrosion Resistant
Equipment TypeEarthing Pit Cover
Country of OriginMade in India

Our Work in the Field

Lightning arrester installed on a rooftop mast above a temple building
Lightning arrester mast installed on a building under construction
Lightning arrester mast installed on a residential building rooftop with solar panels
Technician installing a lightning arrester mast on a building rooftop
Lightning arrester mast installed on a building under construction
Technicians installing a lightning arrester on a church steeple

Also looking for windmill operation and maintenance services?

View Windmill & Wind Turbine Maintenance Services

Lightning Protection FAQs

Common questions about ESE lightning arresters, earthing and surge protection in India.

What is an ESE lightning arrester?

An Early Streamer Emission (ESE) lightning arrester is a non-electronic air terminal designed to trigger an earlier upward streamer than a conventional lightning rod, giving it a wider zone of protection. Henel Engineers supplies and installs ESE lightning arresters, including the TOPBAS SIRIUS and UMBRAECO models.

Is Henel Engineers an authorised TOPBAS supplier?

Yes. Henel Engineers is an authorised supplier of TOPBAS lightning protection products, which are imported from Turkey, including ESE lightning arresters, surge protection devices and earthing accessories.

What does a complete lightning protection system include?

A complete lightning protection system typically includes an ESE air terminal or lightning rod, down conductors, an earthing system, surge protection devices, and test joints and accessories — designed to the applicable standards with site-specific risk assessment and zone-of-protection calculations.

What is the difference between an ESE lightning arrester and a conventional lightning arrester?

A conventional (Franklin rod) lightning arrester protects a relatively small area around its tip, while an ESE lightning arrester emits an upward streamer earlier and therefore covers a much larger radius from a single mast. For example, the copper bonded conventional arrester supplied by Henel Engineers has a 5-metre protection radius, whereas the TOPBAS SIRIUS ESE arrester offers a protection radius of up to 107 m (5 m mast, Level IV).

What does "Level IV" mean for a lightning arrester protection radius?

Standards such as NF C 17-102 define four protection levels, from Level I (the most stringent, with the smallest protection radius) to Level IV (the least stringent, with the largest radius). The required level is chosen from a lightning risk assessment of the structure, so the actual radius used in a design depends on the level, mast height and the arrester’s ΔT.

Does a non-electronic ESE lightning arrester need a battery or power supply?

No. Non-electronic ESE lightning arresters such as the TOPBAS SIRIUS and UMBRAECO work without a battery or any external power source, which keeps maintenance simple.

What types of buildings need a lightning protection system?

Henel Engineers provides lightning protection for factories, warehouses, commercial buildings, communication towers and infrastructure facilities. Our field installations also include temples, church steeples, buildings under construction and residential rooftops with solar panels.

Why is earthing important in a lightning protection system?

Earthing gives lightning and fault currents a low-resistance path to dissipate safely into the ground. Without a good earthing system, even a well-placed lightning arrester cannot protect a structure effectively. Henel Engineers designs and installs earthing systems, including chemical earth electrodes and earth pits.

If a building has a lightning arrester, does it still need surge protection?

Yes. A lightning arrester (external lightning protection) protects the structure from a direct strike, but surges can still travel through power and data lines and damage equipment inside. Surge protection devices protect the internal electrical installation, which is why a complete lightning protection system includes both.

What is a Type 1 + 2 surge protection device?

A Type 1 + 2 (Class B + C) SPD combines protection against partial lightning currents (Type 1) and induced surges (Type 2) in a single device, typically installed at the main incoming electrical panel. The TOPBAS TB7K320T12L supplied by Henel Engineers is a three-phase, 3 pole + N, Type 1 + 2 SPD rated 320 VAC (Uc), with 7 kA impulse current (Iimp), 30 kA nominal discharge current (In), a 1.6 kV voltage protection level (Up) and IP20 rating.

Which areas does Henel Engineers serve for lightning protection?

Henel Engineers supplies and installs lightning protection systems for industrial, commercial and infrastructure projects across India.

How do I get a quote for a lightning protection system?

Call +91 94432 82312 or +91 94436 92711, message us on WhatsApp, or use the contact form to share your requirement and request a quote.

Get in Touch

Ready to Protect Your Assets?

Whether you need a complete lightning protection system or professional windmill maintenance, our team is ready to discuss your requirement.